Precor Icarian Adjustable Cable Crossover

Remanufactured
Precor Icarian Adjustable Cable Crossover
Precor

Precor Icarian Adjustable Cable Crossover

Description

Precor Icarian Adjustable Cable Crossover

The Icarian 407B Adjustable Cable Crossover is a stand-alone cable crossover machine with two adjustable high/low pulley stations and a connector that offers dual chin-up bar options. The Crossover adjusts quickly to give users a wide range of exercise options.

Equipment Features

Upholstery Premium-quality upholstery with Beautyguard protective topcoat finish. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Double-layer slipcover in appropriate high wear areas. Double stitching on all seams.
Bolts Grade 5 black zinc in most applications.
Cable Routing Wherever possible, redirection pulleys are used to route cables close to frame to minimize chance of external interference.
Handles Slip-resistant rubber sleeve with machined alloy end-cap.
Weight Stack On most selectorized units, the weight stack is elevated 5 inches to facilitate user pin selection from seated position.
Selector Plates Each selector plate entirely precision machined on all surfaces. Top plate has replaceable Igus precision self-lubricating bushings. Black painted protective finish.
Pivot Points and Joints Pillow block or flange-mount motor-grade rotary bearings or sleeve bearings utilizing either oil-impregnated bronze bushings or pre-lubricated Igus nylon bushings.
Pulleys and Cables Glass-fiber-reinforced nylon pulleys with precision motor-grade ball bearings. 3/16-inch (7x19) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch coated to 3/16 inch. The cable will conform to specification MIL-W-83420D-BARE cable only. Attachments are climbing-rated carabiner design.
Frame and Finish 11 gauge (.120") and 7 gauge (.188") 2x4-inch bent electroweld steel tubing. Minimum of 3 standard bolt tabs on appropriate units. Abrasive grit pre-finish is followed by electrostatically applied, heat-cured powder coat.
Guide Rods Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and retardation of rust.
Bearings and Pivot Points Oversized linear reticulating ball bearings are self-aligning, sealed and running on casehardened shafts.

Equipment Specifications

Weight Stack Standard 150 lbs / 68 kg
Options Rubber Feet Standard Shroud
Weight Stack Heavy 200 lbs / 91 kg
Weight Stack Depicted weight stack shrouds are not available
Standard Upholstery Colors Any From Chart
Standard Frame Colors Any From Chart

Equipment Dimensions and Weight

Length 176 inches / 447 cm
Width 43 inches / 109 cm
Equipment Weight 870 lbs / 396 kg
Height 91 inches / 231 cm